Brake, Clutch & Coupling manufacturers, Gummi, have had their logo re-designed. Industrial Clutch Parts have updated the Gummi section on the website, adding in the new Gummi logo.
WPT Power Corporation is proud to announce a new line of Power Pump Drives. The Power Pump Drives will better equip WPT to meet a broad range of engine driven application needs.
The Power Pump Drive is available for indirect drives which makes them suitable for off highway and mobile equip-ment, including but not limited to wood chippers, road working machines, rock crushers and grinders. The PPD mounts directly to the engine SAE housing and flywheel. The PPD uses a flexible rubber coupling to dampen torsional engine vibrations.
“Our new PPDs are versatile, with several types of pump pads and accessories keeping the options greater for our customers,” says Lane Brock, President of WPT Power Corporation.
“The Power Pump Drives are available in four sizes, which will enable them to handle the rigorous duty cycles of large mobile equipment throughout many industries. The introduction of this new product line of Power Pump Drives is consistent with our growth plans for the development of new products that further compliment our already extensive line of power transmission, clutch and brake products.” The PPDs are available in four different sizes with specs as follows:
- PPDX:
Maximum torque capacity is 4650 lb-ft [6300 Nm] and maximum operating speed is 2100 rpm. The unit weighs 1170 lb [530 kg] and is 14.3” [363 mm] long. It is designed to mount to SAE 0 housings with 18” flywheels, and SAE 1 with 14” flywheels. It can be supplied with up to 8 pump mounting faces that can range from SAE D to SAE B-B which can deliver up to 535 hp [400 kW] of pumping power at any given time. - PPDL:
Maximum torque capacity is 2470 lb-ft [3350 Nm] and maximum operating speed is 2200 rpm. The unit weighs 770 lb [350 kg] and is 12.2” [310 mm] long. It is designed to mount to SAE 1 housings with 14” fly-wheels. It can be supplied with up to 8 pump mounting faces that can range from SAE D to SAE B-B which can deliver up to 400 hp [300 kW] of pumping power at any given time. - PPDM:
Maximum torque capacity is 1475 lb-ft [2000 Nm] and maximum operating speed is 2600 rpm. The unit weighs 430 lb [195 kg] and is 10.1” [257 mm] long. It is designed to mount to SAE 1 housings with 14” flywheels, and SAE 2 or 3 with 11.5” flywheels. This unit comes equipped with 4 pump mounting faces that can range from SAE D to SAE B-B which can deliver up to 235 hp [175 kW] of pumping power at any given time. - PPDS:
Maximum torque capacity is 413 lb-ft [560 Nm] and maximum operating speed is 3000 rpm. The unit weighs 110 lb [50 kg] and is 8.6” [219 mm] long. It is designed to mount to SAE 4 housings with 10” flywheels. This unit comes equipped with two SAE B mounting faces which can deliver up to 58 hp [43 kW] of pumping power at any given time.
If you require further informaion or would like a free quotation on the Power Pump Drive, please do not hesitate to contact us: sales@icpltd.co.uk.
We look forward to hearing from you.
View the huge range of Caliper Brakes for various different industries that Industrial Clutch Parts has to offer. Click on the links below or contact us for more information.
Industrial Clutch Parts Ltd are pleased to announce that they had a very successful show at the Europort Inland Waterways Show in Rotterdam.
To view all the pictures from the show visit us on facebook:
www.facebook.com/IndustrialClutch
Industrial Clutch Parts & Friction Technology will be showcasing a range of Plate & Drum Clutches at the Europort 2011 exhibition, in Ahoy, Rotterdam from 8-11 November 2011.
We have FREE Tickets available for the show if you wish to attend. If you would like further information or to arrange a meeting on the stand, please do not hesitate to contact us: sales@icpltd.co.ukor telephone us: +44 (0) 1663 734 627.
The Goizper Pneumatic Clutch-Brake Unit application examples, used in the Automotive Industry, have now been added to the Industrial Clutch Parts website. Take a look at them by clicking here
Specialist brake manufacturer and distributor, Industrial Clutch Parts are now official distributors of Siegerland Bremsen – Sibre products.
Siegerland’s ‘SIBRE’ range of quality disc, drum brakes and calipers are specified in a wide range of heavy industry , known especially for their electrohydraulic thruster actuated designs providing safety and reliability on cranes in ports, steelworks and other material handling applications. Industrial Clutch Parts also provides SIBRE storm brakes, safety and back up brakes, discs, drums and associated components for the supply of a complete package system.
In addition ICP also offers the SIBRE TE-I imperial drum brake that meets the needs of all types of applications requiring an imperial solution. The TE-I also features a unique lever synchronisation linkage that eliminates the need to manually adjust the shoe air gap.
As well as SIBRE brakes, Industrial Clutch Parts supplies a wide range of other brakes and clutches from other manufacturers and friction materials. ICP can inspect and advise on the condition, performance and maintenance of any type of pneumatic, electromagnetic or hydraulic brake or clutch unit. All Industrial Clutch Parts friction materials are OEM or After Market Approved for total confidence and reliability.
For more information about SIBRE brakes, or any other brake or clutch related matter, please visit the website at www.industrialclutch.com call 01663 734 627 or email sales@icpltd.co.uk
Who’s at ICP
We are extremely excited to have Jamie Cooper join the ICP team as the new Internal Sales Executive. His focus will be to support the Sales Team as well as expanding the communication channels. Everyone at ICP is wishing Jamie much success in his new role!
Jamie previously worked in the Royal Navy as an Aircraft Engineer, working on the world famous Harrier Jump Jet until the financial cutbacks which saw the end of the large Royal Navy Aircraft Carriers. Whilst working in the Royal Navy, Jamie won the prestigious Owen Cup Award.
Here are his quick fire questions …
Hobby: Golf
Favourite Holiday Destination? Spain
Favourite Takeaway? Indian
Last Holiday? Turkey
Favourite Film? Predator
Favourite Drink? Carling
Who would be your ideal dinner guests?
Michelle Keegan
When marine winch manufacturer Broehl Maschinenfabrik needed a fast delivery of water-cooled brakes and clutches for an anchor-handling winch project on an offshore oil and gas rig they called UK clutch and brake specialists Industrial Clutch Parts.
Tension control of the anchor cables is critical to rig stability in the swell of the ocean, with dependable brakes and clutches key to winch performance in a typically harsh environment.
After discussions with Broehl, Industrial Clutch Parts pledged to deliver a batch of 24in WPT Power water-cooled clutches (WCC) within a very small delivery window in the rig build programme.
Since the first batch of storage winches were located in the bottom structure of the rig, they needed to be installed at the start of the construction programme before the decks above were permanently welded closed.
Penalties for late delivery in this industry are severe and Broehl stressed the need for a guaranteed delivery schedule for the clutches, which Industrial Clutch Parts committed to.
Liaising with Broehl engineers, Industrial Clutch Parts configured the clutch design for optimum output torque and slipping performance to deliver the necessary tension control in the anchor winch cables during payout and retraction functions.
The anchor-handling winch is designed with a WPT Power 24in water-cooled clutch, to provide variable torque and high heat dissipation capacity in constant slipping applications. The clutch is fully protected against saltwater corrosion and is airtube actuated for sensitive torque control.
Broehl supplied the cooling water and control system to maximise the clutches’ efficiency.
In the second part of the contract, and also under penalty for late delivery, Industrial Clutch Parts supplied a batch of WPT Power 36in water-cooled brakes (WCB) for the anchor cable traction winches. The traction winches are fitted with WPT 36in Water Cooled Brakes that enable the operator to safely pay out a very heavy wire rope anchor cable, often hundreds of meters long, via a tug boat and brake control system. This ensures a secure handling of the rope between the winch and tugboat which otherwise, through any slackness, could run uncontrolled to the seabed.
Industrial Clutch Parts’ Mike Wallworth said, “Key to winning this contract was our ability to supply clutches and brakes that were designed, built and delivered within Broehl’s critical delivery window. In addition, we worked closely with our client installing in the clutches and brakes some new features developed from their experience in this very specialised industry.”
The Broehl order was delivered within four months of ordering, a solution that, according to Mike Wallworth, “is all about focus on quick delivery and efficient response to the application brief.”
ICP’s range of water-cooled brakes is suitable for marine and other exacting environmental applications where changeable harsh conditions can severely affect performance and reliability.
Industrial Clutch Parts are extremely pleased to announce they have been selected as WPT Power Corporation’s “Distributor of the Year” for 2010.
In addition to “Distributor of the Year”, Industrial Clutch Parts also finished first for the “Largest Increase in Sales”, “Largest Mechanical PTO Distributor”, first in “Top 10 In Assemblies” and also first in “Overall Sales”.
WPT Power Corporation are very pleased to have Industrial Clutch Parts as a marketing and sales partner representing their products throughout critical growth markets.