tollok_logo
Tollok

Tollok SpA was founded in 1979  and from the start concentrated on cone clamping elements.  Today Tollok is one of the most successful producers with a range of 18 different standard types. 

The Tollok factory is highly automated and the high quality is maintained by each robot group and flexible machining centre that control each manufactured part to a high degree of accuracy.

Specialist advice by our experienced engineers provides with a fast and high efficient solution to world-wide application problems. Our technical department is equipped with the latest CAD equipment and programmes for finished element calculations and is able to suggest the most efficient standard or tailor-made elements.

!

Copy of TLK 110

!
Larger picture 

Self-Centering

  • Allow the use of small diameter hubs
  • Shafts 6-130mm
  • Torques up to 25000Nm
  • Medium-high torque
  • Limited installation time
  • Restricted hub diameter
  • Very low surface pressure

 

Copy of TLK 130/131

!
Larger picture 

Self-Centering

  • Low surface pressure
  • Shafts 20-180mm
  • Torques up to 66000Nm
  • High torque
  • Limited installation time
  • Application economically advantageous
  • Excellent shaft-hub perpendicularity

Copy of TLK 132/133

!
Larger picture 
  • Medium-high torque
  • Limited installation time
  • Application economically advantageous
  • Interchangeable with TLK 200

 

  

Copy of TLK 134

!
Larger picture 

Self-Centering

  • Variable bores with fixed OD
  • Shafts 14-50mm
  • Torques up to 1830Nm

Copy of TLK 200

!
Larger picture 

Not self-centering

  • Industry standard
  • Shafts 20-900mm
  • Torques up to 1650000Nm

Copy of TLK 250/250L

!
Larger picture 
Self or Not Self-Centering
 
  • Radial tightening nut
  • Shafts 14-70mm
  • Torques up to 1360Nm

Copy of TLK 300

!
Larger picture 
Not self-centering
 
  • User specified pressure flange
  • Shafts 6-540mm
  • Torques up to 400000Nm

Copy of TLK 400

!
Larger picture 
Self-Centering
 
  • Heavy duty model
  • Shafts 45-600mm
  • Torques up to 1695000Nm

Copy of TLK 450

!
Larger picture 
Self-Centering
 
  • Economical heavy duty
  • Shafts 25-100mm
  • Torques up to 28800Nm

Copy of TLK 603

!
Larger picture 
Shrink discs
Hollow shaft outside diameters 14-480mm
Torques up to 1500000Nm

Copy of TLK 500

!
Larger picture 
Rigid joint
Shafts 17-80mm
Torque up to 4300Nm