11 "prise de force mécanique d'embrayage

Les 11 "Style Automobile PTO est un embrayage fait pour une face plate volant.





 

11 "style automobile PTO Caractéristiques Embrayage:

      • GM style de Bell logement
        - S'installe directement aux moteurs de 5,7, 6,2, 7,4 et 8,1 litres

      • Solide en fonte ductile de Bell logement
        - Conçue pour les applications lourdes
        - Pas de grands trous ouverts, pour aider à garder les conditions météorologiques et
          d'autres éléments

      • Réglage facile
        Vis à billes avec écrou -
        - Mécanisme de lourds ajustements devoir
        - Pas de pièces en fonte estampillé ou mourir

      Des applications de charge • En ligne ou sur le côté

      • Arbre de sortie à clé



Click here to download the exploded view diagram.


Where the Part Number is blank below, please contact us for the number as we are updating the information.

 

ITEM No DESCRIPTION PART NUMBER  
    1 PLATE 11" 2 PLATE 11" 3 PLATE 11"
1 Housing Sae #1
Housing Sae #2
Housing SAE #3
2 Bearing Carrier
3 Hand Lever
4 Hex Head Screw (incl. w/hand lever)
5 Round Head Screw
6 Inspection Plate Cover
7-9 Grease Hose Assembly
7 Grease Hose
8 Fitting
9 Fitting
10 Lock Washer
11 Jam Nut
12 Fitting
13-31 Clutch Pack
WTD11-190
 WTD11-290
13-20 Sliding Sleeve Assembly WTD11-026 WTD11-036
13-16 Brass Collar Assembly WTD11-027 WTD11-039
13 Brass Collar WTD11-015 WTD11-037
14 Hex Head Screw
15 Hex Nut
16 Shim
17 Sliding Sleeve  WTD11-013 WTD11-040
18 Lever Link
19 Lever Link Pin
20 Cotton Pin
21 Adjusting Ring
22 Adjusting Lock Pin
23 Adjusting Lock Pin Spring
24 Lever WTD11-010 WTD11-010 WTD11-010
25 Cotton Pin
26 Spring Washer
27 Lever Pin
28 Floating Plate WTD11-007 WTD11-007 WTD11-077
29 Drive Plate (Solid) WTD11-001 WTD11-001 WTD11-001
Drive Plate (3 Piece) WTD11-002 WTD11-002 WTD11-002
30 Center Plate WTD11-034 WTD11-034 WTD11-078
31 Hub & Back Plate WTD11-008 WTD11-033 WTD11-079
32 Shaft Washer
33 Shaft Nut
34 Pilot Bearing WTD11-024 WTD11-024 WTD11-024
35 Driving Ring WTD11-000 WTD11-032 WTD11-081
36 Hex Head Screw
37 Lock Washer
38 Bearing Retainer Lock
39 Bearing Retainer 
40 Main Bearing WTD11-024 WTD11-042 WTD11-042
41 Hub Key
42 Shaft (Solid)
Shaft (Drilled)
43 Output Key
44 Fitting
45 Operating Shaft
46 Woodruff Key
47 Throwout Yoke
48 Hex Head Screw (incl. w/yoke)
49 Lock Washer (incl. w/yoke)
50 Fitting
51 Hex Head Screw
52 Lock Washer
53 Adjusting Ring (coarse thread)
54 Hub & Back Plate (Small Bore)
55-59 Ball Bearing Sleeve Assembly WTD11-089 WTD11-072
55 Snap Ring (Sleeve)
56 Collar
57 Ball Bearing 
58 Snap Ring (Collar)
59 Sliding Sleeve

!
 <<