ICP Friction Brake Pad Replaces Montalvo Standard Series Brake/Friction Pad

3.250 inch x 0.375 thick
Available Coefficients: 0.10 to 0.45
Usage: Standard, HPS, M-Caliper, HP
Equipped with Standard Modules

 

 

 

 

Material
Carbon base with kevlar, phenolic fillers, and bonding agents.

Notes
4011 with grooves. Longer pad life typical. Stable COF at elevated temps. May glaze at high temp, low pressure, low speed. High propensity for noise.

Material
Carbon base with various phenolic fillers and bonding agents.

Notes
General use. High torque, normal speed. Tends to glaze at intermediate to high temps and low pressures. May be unstable above 350F. High propensity to make noise.

Material
Carbon base with various phenolic fillers and bonding agents.

Notes
4512 with grooves. Standard material for most applications. Low cost. one of the best pads for noise problems. Items produced before January 1988 have orange edge.

Material
Carbon base with various phenolic fillers and bonding agents.

Notes
4512 with grooves and anti-squeal noise reduction. Standard material for most applications. Low cost. One of the best pads for noise problems. Items produced before Jan 1988 have orange edge.

!
 <<