 |
The 11" Automotive Style PTO is a clutch made for a flat face flywheel.
Click here to download the 11" Mechanical PTO document
11" Automotive Style PTO Features:
• GM Style Bell Housing
- Mounts directly to 5.7, 6.2, 7.4 & 8.1 litre engines
• Solid Ductile Iron Bell Housing
- Built for heavy duty applications
- No large open holes, to help keep out weather and other elements
• Easy Adjustment
- Ball screw with jam nut
- Heavy duty adjustment mechanism
- No stamped or die cast parts
• In-line or Side Load Applications
• Keyed Output Shaft
Click here to download the exploded view diagram.
Where the Part Number is blank below, please contact us for the number as we are updating the information.
| ITEM No | DESCRIPTION | PART NUMBER | ||
| 1 PLATE 11" | 2 PLATE 11" | 3 PLATE 11" | ||
| 1 | Housing Sae #1 | |||
| Housing Sae #2 | ||||
| Housing SAE #3 | ||||
| 2 | Bearing Carrier | |||
| 3 | Hand Lever | |||
| 4 | Hex Head Screw (incl. w/hand lever) | |||
| 5 | Round Head Screw | |||
| 6 | Inspection Plate Cover | |||
| 7-9 | Grease Hose Assembly | |||
| 7 | Grease Hose | |||
| 8 | Fitting | |||
| 9 | Fitting | |||
| 10 | Lock Washer | |||
| 11 | Jam Nut | |||
| 12 | Fitting | |||
| 13-31 | Clutch Pack |
WTD11-190 |
WTD11-290 | |
| 13-20 | Sliding Sleeve Assembly | WTD11-026 | WTD11-036 | |
| 13-16 | Brass Collar Assembly | WTD11-027 | WTD11-039 | |
| 13 | Brass Collar | WTD11-015 | WTD11-037 | |
| 14 | Hex Head Screw | |||
| 15 | Hex Nut | |||
| 16 | Shim | |||
| 17 | Sliding Sleeve | WTD11-013 | WTD11-040 | |
| 18 | Lever Link | |||
| 19 | Lever Link Pin | |||
| 20 | Cotton Pin | |||
| 21 | Adjusting Ring | |||
| 22 | Adjusting Lock Pin | |||
| 23 | Adjusting Lock Pin Spring | |||
| 24 | Lever | WTD11-010 | WTD11-010 | WTD11-010 |
| 25 | Cotton Pin | |||
| 26 | Spring Washer | |||
| 27 | Lever Pin | |||
| 28 | Floating Plate | WTD11-007 | WTD11-007 | WTD11-077 |
| 29 | Drive Plate (Solid) | WTD11-001 | WTD11-001 | WTD11-001 |
| Drive Plate (3 Piece) | WTD11-002 | WTD11-002 | WTD11-002 | |
| 30 | Center Plate | WTD11-034 | WTD11-034 | WTD11-078 |
| 31 | Hub & Back Plate | WTD11-008 | WTD11-033 | WTD11-079 |
| 32 | Shaft Washer | |||
| 33 | Shaft Nut | |||
| 34 | Pilot Bearing | WTD11-024 | WTD11-024 | WTD11-024 |
| 35 | Driving Ring | WTD11-000 | WTD11-032 | WTD11-081 |
| 36 | Hex Head Screw | |||
| 37 | Lock Washer | |||
| 38 | Bearing Retainer Lock | |||
| 39 | Bearing Retainer | |||
| 40 | Main Bearing | WTD11-024 | WTD11-042 | WTD11-042 |
| 41 | Hub Key | |||
| 42 | Shaft (Solid) | |||
| Shaft (Drilled) | ||||
| 43 | Output Key | |||
| 44 | Fitting | |||
| 45 | Operating Shaft | |||
| 46 | Woodruff Key | |||
| 47 | Throwout Yoke | |||
| 48 | Hex Head Screw (incl. w/yoke) | |||
| 49 | Lock Washer (incl. w/yoke) | |||
| 50 | Fitting | |||
| 51 | Hex Head Screw | |||
| 52 | Lock Washer | |||
| 53 | Adjusting Ring (coarse thread) | |||
| 54 | Hub & Back Plate (Small Bore) | |||
| 55-59 | Ball Bearing Sleeve Assembly | WTD11-089 | WTD11-072 | |
| 55 | Snap Ring (Sleeve) | |||
| 56 | Collar | |||
| 57 | Ball Bearing | |||
| 58 | Snap Ring (Collar) | |||
| 59 | Sliding Sleeve | |||